{"product_id":"arcadia-t5-lumenize-pro-uvb-light-risers","title":"Arcadia T5 LumenIZE Pro UVB Light Risers for Reptile Enclosures (Set of 2)","description":"\u003cp\u003eLift your Arcadia T5 LumenIZE Pro UVB fixture off the mesh with a set of two freestanding PETG risers. Each riser stands on your enclosure's screen top, and the end of the fixture presses up into a pocket under the arch, where retention ribs grip it. No screws, brackets or tools needed.\u003c\/p\u003e\n\u003ch3\u003eSold as a set of 2\u003c\/h3\u003e\n\u003cp\u003eYour order includes \u003cstrong\u003e2 risers\u003c\/strong\u003e in the height you choose, one for each end of the fixture. Some photos show a tall and a short riser side by side so you can compare the heights. The photos also show both a smooth and a textured print finish. Both are the same PETG part and perform the same.\u003c\/p\u003e\n\u003ch3\u003eWhy you'll like it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnug, secure hold:\u003c\/strong\u003e The pocket narrows from 27 mm to 25 mm at the retention ribs, so the fixture stays seated instead of sliding around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir gap under the lamp:\u003c\/strong\u003e Raising the fixture keeps it off the screen, so warm air can move under and around it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnother way to tune your UVB:\u003c\/strong\u003e UVB strength drops as the lamp moves farther from the basking spot, so the riser height gives you one more way to set the distance. Check the UV index at the basking spot with a UV meter after any change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide, stable stance:\u003c\/strong\u003e The feet sit about 184 mm apart, so the risers stay upright on mesh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchoring tabs:\u003c\/strong\u003e Each foot has a tab with a screw hole, so you can anchor the risers down if you want extra security. Use #6 screws for a cleaner look, or thread a small zip tie through the hole to tie them to the mesh. Screws and zip ties are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your height\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTall, 110 mm (4.33\"):\u003c\/strong\u003e 80 mm (3.15\") of clearance under the arch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort, 90 mm (3.54\"):\u003c\/strong\u003e 60 mm (2.36\") of clearance under the arch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFit check before you order\u003c\/h3\u003e\n\u003cp\u003eSized for the \u003cstrong\u003eArcadia T5 LumenIZE Pro\u003c\/strong\u003e fixture only. It will \u003cstrong\u003enot\u003c\/strong\u003e fit the standard Arcadia T5 UVB fixtures. For those, see my \u003ca href=\"\/products\/arcadia-t5-uvb-light-risers\"\u003eT5 UVB risers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDimensions (each riser)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 110 mm (tall) or 90 mm (short)\u003c\/li\u003e\n\u003cli\u003eWidth: 184.5 mm, foot to foot\u003c\/li\u003e\n\u003cli\u003eThickness: 15 mm\u003c\/li\u003e\n\u003cli\u003ePocket: 27 mm wide (25 mm at the ribs), 20 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy PETG instead of PLA\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles the heat:\u003c\/strong\u003e A T5 HO fixture warms everything it touches, and PLA starts softening at roughly 55 to 60°C. PETG holds its shape up to a glass transition of around 80°C, so the risers won't sag or creep under the fixture during long daily light cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles the moisture:\u003c\/strong\u003e PETG absorbs very little water, roughly 0.2% or less by weight, so it won't swell, warp or weaken from misting, humid substrates or the moisture swings of tropical and desert setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to clean:\u003c\/strong\u003e It is chemically resistant enough to wipe down with standard reptile-safe enclosure cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eado 3D","offers":[{"title":"Tall (110 mm)","offer_id":49829906972910,"sku":"EADO-ARC-LZT5R-110-2PK","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Short (90 mm)","offer_id":49829907005678,"sku":"EADO-ARC-LZT5R-90-2PK","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/4753\/0222\/files\/IMG_0946.jpg?v=1793394188","url":"https:\/\/eado3d.com\/products\/arcadia-t5-lumenize-pro-uvb-light-risers","provider":"Eado 3D","version":"1.0","type":"link"}